-------------------------------------- Voodoo3 Windows(r) 2000 Driver Kit -------------------------------------- Voodoo3(tm) Driver kit: 1.01.03-Beta Voodoo3 Win2k(r) Display Driver and Miniport:5.00.2195.0151 Glide(tm) 2.X Driver: 2.61.00.065 Glide 3.X Driver: 3.10.00.0655 OpenGL(r) Driver Version: 1.0.0.0648 Copyright ( 1998-2000 3dfx Interactive, Inc. ) All Rights Reserved NOTE: Use of this software is subject to the terms in the 3dfx license agreement. 3dfx Interactive, Inc. Website: http://www.3dfx.com This product may be covered by one or more of the following US patents: 5,724,561 5,740,343 5,808,621 5,822,452 5,831,624 ======================================================================= What's in the distribution? ======================================================================= This distribution contains Voodoo Beta drivers and control panel for Windows 2000. The DirectDraw portion of the drivers supports Direct3D when using DirectX 7.0 ======================================================================= Installation ======================================================================= Requirements ------------ - Windows 2000 - PC with a Pentium, Pentium II, or Pentium Pro Processor and a free AGP or PCI slot - 16MB of RAM Fresh Installation ------------------ NOTE: Complete Steps 1 and 2 before removing your existing 2D card. 1) Download the kit to a directory on your local machine. 2) Before removing your existing 2D card switch the video driver to Standard VGA. Click Start, Control Panel. Double-click on Display. Select 640X480 and 16 colors. Accept the changes. 3) Power off the system and remove your existing 2D card. 4) Install the Voodoo Card in a free AGP or PCI Slot 5) Power on the system and verify that video appears during post. 6) Start Windows in Normal mode (Once Windows starts you may be notified that no video device exists, click Cancel if this message appears) 7) Run the 3dfx executable from the location it was downloaded to. Click SETUP. At the welcome screen of 3dfx Tools select NEXT. Click on YES when prompted to install Voodoo Driver. 8) Follow instruction on the screen to install Voodoo Driver and 3dfx Tools Control Panel. 9) Select 'Yes, I want to restart my computer now' when prompted. Upgrade Existing Voodoo Drivers -------------------------------- 1) Start Windows 2000 2) Download the kit to a directory on your local machine. 3) Open the directory where the kit has been placed and double-click on the executable. Click SETUP. At the welcome screen of 3dfx Tools, select NEXT. Click on YES when prompt to install Voodoo Driver. 4) Follow instruction on the screen to install Voodoo Driver and 3dfx Tools Control Panel. 5) Select 'Yes, I want to restart my computer now' when prompted.