-------------------------------------- Voodoo3 Windows(r) 9x Driver Kit -------------------------------------- Voodoo3(tm) Driver kit: 1.05.01-Beta Voodoo3 DirectX(r) Driver Version: 4.12.01.0598 Voodoo3 Win9x 2D/3D Display Drivers: 4.12.01.0598 Glide(tm) 2.X Driver: 2.61.00.0656 Glide 3.X Driver: 3.10.00.0656 OpenGL(r) Driver Version: 1.0.0.0661 Copyright ( 1998-2000 3dfx Interactive, Inc. ) All Rights Reserved NOTE: Use of this software is subject to the terms in the 3dfx license agreement. 3dfx Interactive, Inc. Website: http://www.3dfx.com This product may be covered by one or more of the following US patents: 5,724,561 5,740,343 5,808,621 5,822,452 5,831,624 ======================================================================= What's in the distribution? ======================================================================= This distribution contains Voodoo drivers and control panel for Windows 95/98. The DirectDraw portion of the drivers supports Direct3D when using DirectX 7.0 NOTE: DirectX 7.0 redistributable files should be used with these drivers! ======================================================================= Installation ======================================================================= Requirements ------------ - Windows 95/98 - PC with a Pentium, Pentium II, or Pentium Pro Processor and a free AGP or PCI slot - 16MB of RAM Fresh Installation ------------------ NOTE: Complete Steps 1 and 2 before removing your existing 2D card. 1) Extract the files for the Voodoo3 driver to a directory. 2) Before removing your existing 2D card switch the video driver to Standard VGA. Click Start, Control Panel. Double-click on Display. Select 640X480 and 16 colors. Accept the changes. 3) Power off the system and remove your existing 2D card. 4) Install the Voodoo Card in a free AGP or PCI Slot 5) Power on the system and verify that video appears during post. 6) Start Windows in Normal mode (Once Windows starts you may be notified that no video device exists, click Cancel if this message appears) 7) Go to the directory where you put the Voodoo driver, run the executable file. Click SETUP. At the welcome screen of 3dfx Tools, select NEXT. Click on YES when prompt to install Voodoo Driver. 8) Follow instruction on the screen to install Voodoo Driver and 3dfx Tools Control Panel. 9) Select 'Yes, I want to restart my computer now' when prompted. 10) Install DirectX 7.0. Upgrade Existing Voodoo3 Drivers -------------------------------- 1) Start Windows 95/98 2) Extract the files for the Voodoo driver to a directory. 3) Go to the directory where you put the Voodoo driver, run the executable file. Click SETUP. At the welcome screen of 3dfx Tools, select NEXT. Click on YES when prompt to install Voodoo Driver. 4) Follow instruction on the screen to install Voodoo Driver and 3dfx Tools Control Panel. 5) Select 'Yes, I want to restart my computer now' when prompted. 6) Install DirectX 7.0