Voodoo3 2000/3000 Windows NT(r) Retail Drivers - AGP/PCI Boards Version: 1.04.00

Download Updated: February 18, 2000
Page Updated: February 18, 2000


What's new in 1.04.00
  1. Fixed problem with OpenGL failing WglMakeCurrent call.
  2. Fixed performance issue in StarCraft.
  3. Fixed problem with Age of Empires
  4. Fixed problem with Age of Empires 2

System Requirements

Download and Installation Instructions
  1. Power off the system and remove your existing 2D card.
  2. Install the Voodoo3 Card in a free PCI/AGP Slot
  3. Power on the system and verify that video appears during post and boot to VGA Mode from Boot Menu
  4. Log-in to Windows NT as Administrator.
  5. Extract the files for the Voodoo3 driver to a empty temporay directory.
  6. Find and run the SETUP.EXE program located in that directory.
  7. You may then be prompted to insert the Windows NT Voodoo3 Driver Disk. Enter the path to the drivers again.
  8. Reboot the system when prompted.
  9. Start Windows NT. If problems occur, revert to "Last Known Good" from within the Windows NT startup options.
  10. Delete the directory if desired.
NOTE: These drivers will NOT work with: Voodoo Banshee, Voodoo2, Voodoo Rush or Voodoo Graphics based cards.